15.3.2　仮想ルータの設定確認

仮想ルータの設定確認は，運用コマンドshow vrrpstatusで行います。detailパラメータを指定すると，仮想ルータの設定の詳細情報を取得できます。

図15‒15　show vrrpstatusコマンドの実行結果
> show vrrpstatus detail interface vlan 10 vrid 1 Date 20XX/12/10 12:00:00 UTC VLAN0010: VRID 1 VRF 2 Virtual Router IP Address : 170.10.10.2 Virtual MAC Address : 0000.5e00.0101 Current State : MASTER Admin State : enable Priority : 80 /100 IP Address Count : 1 Master Router's IP Address : 170.10.10.2 Primary IP Address : 170.10.10.1 Authentication Type : SIMPLE TEXT PASSWORD Authentication Key : ABCDEFG Advertisement Interval : 1 sec Preempt Mode : ON Preempt Delay : 60 Non Preempt swap timer ：30 Accept Mode : ON Virtual Router Up Time : Mon Dec 6 16:55:00 20XX track 10 VLAN0022 VRF 3 Status : (IF UP) Down Priority : 50 Target Address ： 192.168.0.20 Vrrp Polling Status : reachable track 20 VLAN0023 Status : (IF UP) Down Priority : 40 track 30 gigabitethernet 0/10 Status : (IF DOWN) Down Priority : 20 track 40 port-channel 2 Status : (IF UP) Down Priority : 20 >

図15‒15　show vrrpstatusコマンドの実行結果

> show vrrpstatus detail interface vlan 10 vrid 1
Date 20XX/12/10 12:00:00 UTC
VLAN0010: VRID 1 VRF 2
   Virtual Router IP Address : 170.10.10.2
   Virtual MAC Address : 0000.5e00.0101
   Current State : MASTER
   Admin State : enable
   Priority : 80 /100
   IP Address Count : 1
   Master Router's IP Address : 170.10.10.2
   Primary IP Address : 170.10.10.1
   Authentication Type : SIMPLE TEXT PASSWORD
   Authentication Key : ABCDEFG
   Advertisement Interval : 1 sec
   Preempt Mode : ON
   Preempt Delay : 60
   Non Preempt swap timer ：30
   Accept Mode : ON
   Virtual Router Up Time : Mon Dec  6 16:55:00 20XX
   track 10 VLAN0022 VRF 3 Status : (IF UP) Down Priority : 50
     Target Address ： 192.168.0.20
     Vrrp Polling Status : reachable
   track 20 VLAN0023  Status : (IF UP) Down Priority : 40
   track 30 gigabitethernet 0/10 Status : (IF DOWN) Down Priority : 20
   track 40 port-channel 2 Status : (IF UP) Down Priority : 20
>

15.3.2 仮想ルータの設定確認

15.3.2　仮想ルータの設定確認