運用コマンドレファレンス

[目次][索引][前へ][次へ]


show sflow

sFlow統計についてのコンフィグレーション設定状態と動作状況を表示します。

[入力形式]

show sflow [detail]

[入力モード]

一般ユーザモードおよび装置管理者モード

[パラメータ]

detail
sFlow統計情報の設定状態と動作状況の詳細情報を表示します。

[実行例]

図38-1 sFlow統計の設定状態と動作状況の表示

> show sflow
Date 2007/01/26 20:04:01 UTC 
sFlow service status: enable
Progress time from sFlow statistics cleared:  8:00:05
sFlow agent data :
  sFlow service version  : 4
  CounterSample interval rate: 60 seconds
  Default configured rate: 1 per 2048 packets
  Default actual rate    : 1 per 2048 packets
  Configured sFlow ingress ports :  0/2-4
  Configured sFlow egress ports  :  ----
  Received sFlow samples : 37269  Dropped sFlow samples               :    2093
  Exported sFlow samples : 37269  Couldn't export sFlow samples       :       0
  Overflow time of sFlow queue   :  0 seconds
sFlow collector data :
  Collector IP address: 192.168.4.199  UDP:6343  Source IP address: 130.130.130
.1
   Send FlowSample UDP packets   : 12077  Send failed packets:     0
   Send CounterSample UDP packets:   621  Send failed packets:     0
  Collector IP address: 192.168.4.203  UDP:65535  Source IP address: 130.130.13
0.1
   Send FlowSample UDP packets   : 12077  Send failed packets:     0
   Send CounterSample UDP packets:   621  Send failed packets:     0
 

図38-2 sFlow統計の設定状態と動作状況の詳細表示

> show sflow detail
Date 2007/01/26 20:04:01 UTC 
sFlow service status: enable
Progress time from sFlow statistics cleared:  8:00:05
sFlow agent data :
  sFlow service version  : 4
  CounterSample interval rate: 60 seconds
  Default configured rate: 1 per 2048 packets
  Default actual rate    : 1 per 2048 packets
  Configured sFlow ingress ports :  0/2-4
  Configured sFlow egress ports  :  ----
  Received sFlow samples : 37269  Dropped sFlow samples              :    2093
  Exported sFlow samples : 37269  Couldn't export sFlow samples    :       0
  Overflow time of sFlow queue   :  0 seconds
sFlow collector data :
  Collector IP address: 192.168.4.199  UDP:6343  Source IP address: 130.130.130
.1
   Send FlowSample UDP packets   : 12077  Send failed packets:     0
   Send CounterSample UDP packets:   621  Send failed packets:     0
  Collector IP address: 192.168.4.203  UDP:65535  Source IP address: 130.130.13
0.1
   Send FlowSample UDP packets   : 12077  Send failed packets:     0
   Send CounterSample UDP packets:   621  Send failed packets:     0
Detail data :
  Max packet size: 1400 bytes
  Packet information type: header
  Max header size: 128 bytes
  Extended information type: switch,router,gateway,user,url
  Url port number: 80,8080
  Sampling mode: random-number
  Sampling rate to collector: 1 per 2163 packets
  Target ports for CounterSample: 0/2-4

[表示説明]

表38-1 sFlow統計情報表示内容

表示項目 表示内容
sFlow service status sFlow統計の現在の動作状況
(対象となるポートが指定されていない場合はdisableと表示)
Progress time from sFlow statistics cleared sFlow統計が開始してからの経過時間,または最後にclear sflow statisticsコマンドが実行されてからの経過時間
hh:mm:ss:(24時間以内の場合:hh=時,mm=分,ss=秒)
D day:(24時間を超えた場合:D=日数)
sFlow service version sFlowパケットのバージョン
CounterSample interval rate カウンタサンプルの送信間隔(秒)
Default configured rate コンフィグレーションで設定された装置全体のサンプリング間隔
Default actual rate 実際の装置全体のサンプリング間隔
Configured sFlow ingress ports コンフィグレーションで"sflow ingress"が設定されたsFlow統計を収集しているポート
Configured sFlow egress ports コンフィグレーションで"sflow egress"が設定されたsFlow統計を収集しているポート
Received sFlow samples 正常にサンプリングされたパケット総数
Dropped sFlow samples 装置内部で優先的な処理があった場合や,処理能力以上の通知があった場合に,ソフトウェア内のsFlow統計処理待ちキューに積めずに廃棄したパケット総数
(ハードウェア内のsFlow統計処理待ちキューに積めずに廃棄した数は含まれません)
Overflow time of sFlow queue clear sflow statisticsコマンドが実行されてからのsFlow統計処理待ちキューが満杯状態だった時間(秒)
本値が増えている場合はサンプリング間隔を調整してください。
Exported sFlow samples コレクタへ送信したUDPパケットに含まれるサンプルパケット総数
Couldn't export sFlow samples 送信に失敗したUDPパケットに含まれるサンプルパケット総数
Collector IP address コンフィグレーションにて設定されているコレクタのIPアドレス
UDP UDPポート番号
Source IP address コレクタへ送信時に,エージェントIPとして使用しているアドレス
Send FlowSample UDP packets コレクタへ送信したフローサンプルのUDPパケット数
Send failed packets コレクタへ送信できなかったUDPパケット数
Send CounterSample UDP packets コレクタへ送信したカウンタサンプルのUDPパケット数
Max packet size sFlowパケットの最大サイズ
Packet information type フローサンプルの基本データ形式
Max header size 基本データ形式でヘッダ型を使用する場合のサンプルパケットの最大サイズ
Extended information type フローサンプルの拡張データ形式
Url port number 拡張データ形式でURL情報を使用する場合に,HTTPパケットと判断するポート番号
Sampling mode サンプリングの方式
random-number サンプリング間隔に従った確率(乱数)で収集
Sampling rate to collector 廃棄が発生しない推奨サンプリング間隔
現在のサンプリング間隔に問題がある場合に妥当な値を表示します。コンフィグレーションで設定された値より小さくなることはありません。
サンプリング間隔を変更した場合は,clear sflow statisticsコマンドを実行してください。実行するまで正しい値で表示されない場合があります。
Target ports for CounterSample カウンタサンプルの対象ポート

[通信への影響]

なし

[応答メッセージ]

表38-2 show sflowコマンドの応答メッセージ一覧

メッセージ 内容
Can't execute. コマンドを実行できません。再実行してください。
sflow doesn't seem to be running. フロー統計プログラムが起動していないため,コマンドが失敗しました。sFlow統計が有効になっているにもかかわらずこのメッセージが出る場合は,フロー統計プログラムの再起動を待って,コマンドを再実行してください。

[注意事項]

パケット数や統計情報カウンタが最大値(32bitカウンタ)を超えた場合,0に戻ります。

IPアドレスやポートがコンフィグレーションで設定されていない場合は"----"と表示します。

[目次][前へ][次へ]


[他社商品名称に関する表示]

Copyright (c)2005, 2011, ALAXALA Networks Corporation. All rights reserved.