運用コマンドレファレンス Vol.2
[機能]
DHCPクライアントの統計情報を表示します。
[入力形式]
show ip dhcp client statistics [<Interface name>]
[パラメータ]
- 省略
- DHCPクライアントの構成定義で宣言されているすべてのインタフェースの統計情報を表示します。
- <Interface Name>
- 指定されたインタフェースの統計情報を表示します。
[使用者レベル]
一般ユーザ
[実行例]
指定インタフェースの統計情報を表示します。
> show ip dhcp client statistics Site1 <Site1> state:BOUND < DHCP Client statistics > T1 expire counts : 3 T2 expire counts : 1 timeout counts : 1 < Send Packets > BOOTREQUEST : 0 DHCPDISCOVER : 200 DHCPREQUEST : 178 DHCPDECLINE : 0 DHCPRELEASE : 0 DHCPINFORM : 0 < Receive Packets > BOOTRFPLY : 0 DHCPOFFER : 190 DHCPACK : 172 DHCPNAK : 6 >DHCPクライアントの構成定義で宣言されているすべてのインタフェースの統計情報を表示します。
> show ip dhcp client statistics <Site1> state:BOUND < DHCP Client statistics > T1 expire counts : 3 T2 expire counts : 1 timeout counts : 1 < Send Packets > BOOTREQUEST : 0 DHCPDISCOVER : 200 DHCPREQUEST : 178 DHCPDECLINE : 0 DHCPRELEASE : 0 DHCPINFORM : 0 < Receive Packets > BOOTRFPLY : 0 DHCPOFFER : 190 DHCPACK : 172 DHCPNAK : 6 <Site2> state:REQUESTING < DHCP Client statistics > T1 expire counts : 1 T2 expire counts : 0 timeout counts : 2 < Send Packets > BOOTREQUEST : 0 DHCPDISCOVER : 50 DHCPREQUEST : 78 DHCPDECLINE : 0 DHCPRELEASE : 0 DHCPINFORM : 0 < Receive Packets > BOOTRFPLY : 0 DHCPOFFER : 90 DHCPACK : 72 DHCPNAK : 6 >
[表示説明]
表1-54 show ip dhcp client statisticsコマンドの表示項目
表示大項目 表示小項目 意味 <Interface Name> state インタフェース状態
- REBOOTING:再初期設定中
- INIT:初期設定中
- SELECTING:サーバ選択中
- REQUESTING:応答待ち
- BOUND:リース中
- RENEWING:リース延長要求中
- REBINDING:リース再割当て要求中
<DHCP Client statistics> T1 expire counts リース更新要求時間検出回数 T2 expire counts リース再割当て要求時間検出回数 timeout counts 応答待ちタイムアウト回数 <Send Packets> BOOTREQUEST BOOTREQUESTパケット送信数 DHCPDISCOVER DHCPDISCOVERパケット送信数 DHCPREQUEST DHCPREQUESTパケット送信数 DHCPDECLINE DHCPDECLINEパケット送信数 DHCPRELEASE DHCPRELEASEパケット送信数 DHCPINFORM DHCPINFORMパケット送信数 <Receive Packets> BOOTREPLY BOOTREPLYパケット受信数 DHCPOFFER DHCPOFFERパケット受信数 DHCPACK DHCPACKパケット受信数 DHCPNAK DHCPNAKパケット受信数
[ユーザ通信への影響]
なし
[応答メッセージ]
表1-55 show ip dhcp client statisticsコマンドの応答メッセージ一覧
メッセージ 内容 <show client statistics>:No enough memory. 本コマンドを実行するための十分なメモリがありません。 Now another user used dhcp command, please try again. 他のユーザーがdhcp関連コマンド使用中です。
しばらくして再投入してください。For the feature to be stopping, it isn't possible to use this command. DHCPクライアントが停止しているため,このコマンドは使用することができません。 <show client statistics>:No such Interface <name> 指定されたインタフェースに誤りがあります。 Can't execute this command in standby rm. 待機系RMではこのコマンドは実行できません。
[注意事項]
なし
Copyright (c)2005 ALAXALA Networks Corporation. All rights reserved.