2.6 STACK

This section describes the operation messages for the event location STACK.

Table 2-13: Operation messages for event location STACK
Message ID	Event Level	Message text
Message ID	Content and response
34000001	E3	Switch <switch no.> changed to <role> switch and initializing.
34000001	The member switch changed its status to <role> and started initialization. <switch no.>: Switch number <role>: Switch status master: Master backup: Backup [Action] None.
34000002	E3	Switch <switch no.> changed to <role> switch and started switchover.
34000002	The member switch changed its status to <role> and started switchover. <switch no.>: Switch number <role>: Switch status master: Master [Action] None.
34000003	E3	Master switch detected switch <switch no.> and adding to stack.
34000003	The master switch added the member switch <switch no.> to STACK. <switch no.>: Switch number [Action] None.
34000004	E3	Switch <switch no.> was deleted from stack.
34000004	The member switch was deleted from the stack configuration. <switch no.>: Switch number [Action] Check the status of the member switch and the status of the stack port used to connect the member switch.
34000005	E3	Stack port(<switch no.>/<nif no.>/<port no.>) connected with switch <switch no.> of Machine ID <mac address>.
34000005	The stack port was connected with a member switch that has the chassis MAC address <mac address>. <switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number <switch no.>: Switch number <mac address>: Chassis MAC address [Action] None.
34000006	E3	Stack port(<switch no.>/<nif no.>/<port no.>) disconnected with switch <switch no.> of Machine ID <mac address>.
34000006	The stack port was disconnected from a member switch that has the chassis MAC address <mac address>. <switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number <switch no.>: Switch number <mac address>: Chassis MAC address [Action] Check the status of both the stack port and the disconnected member switch.
34000007	E3	Switch <switch no.> connected to stack port(<switch no.>/<nif no.>/<port no.>) cannot join in stack for <reason>.
34000007	A member switch connected to the stack port cannot participate in the stack configuration. <switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number <switch no.>: Switch number <reason>: Reason why the member switch cannot participate in the stack configuration equal switch number: The switch number of this member switch matches the switch number of another member switch connected to the stack port. Unequal license: Software license or option license mismatch between the local member switch and other member switches connected to the stack port Over switch maximum number: The number of other member switches connected to the stack port of the local member switch exceeds the limit. [Action] If equal switch number, change the switch number of the other member switch connected to the stack port. If unequal license, match the license of this member switch to the licenses of the other member switches connected to the stack port. If over switch maximum number, isolate other member switches connected to the stack port.
34000008	E3	Master switch ordered switch <switch no.> to restart because master switch detected stack error.
34000008	The master switch instructed this member switch to restart because the master switch detected an error. <switch no.>: Switch number [Action] If this message is repeatedly output, replace the member switch that has the displayed switch number.
34000009	E3	Switch <switch no.> restarted because this switch was disconnected from other switch in stack building.
34000009	The member switch was restarted because it was isolated from the other member switches during the stack building process. <switch no.>: Switch number [Action] Check the status of all stack ports between the member switch and the other member switches.
3400000a	E3	Switch <switch no.> restarted because this switch synchronized configuration of master switch.
3400000a	The member switch was restarted because it synchronized with the configuration of the master switch. <switch no.>: Switch number [Action] None.
3400000b	E3	Switch <switch no.> restarted because hardware has stopped.
3400000b	The member switch was restarted because the hardware stopped. <switch no.>: Switch number [Action] Check the log by executing the show logging command.If a problem is indicated in the log, take appropriate action according to the error message.
3400000c	E3	Switch <switch no.> restarted because this switch detected other master switch.
3400000c	The member switch <switch no.> was restarted because another master switch was detected. <switch no.>: Switch number [Action] None.
3400000d	E9	Switch <switch no.> restarted due to restart order from master switch.
3400000d	The member switch was restarted as instructed by the master switch. <switch no.>: Switch number [Action] If this message is repeatedly output, replace the member switch.
3400000e	E9	Switch <switch no.> restarted due to stack error.
3400000e	The member switch was restarted because an error occurred in the stack. <switch no.>: Switch number [Action] If this message is repeatedly output, replace the member switch.
3400000f	E9	Switch <switch no.> restarted because this switch failed synchronization of configuration of master switch.
3400000f	The member switch was restarted because it failed to synchronize with the configuration of the master switch. <switch no.>: Switch number [Action] Verify that the software version, software license, and option license are the same for the master switch and member switches. Check the master switch configuration settings related to the relevant member switches.
34000011	E3	Switch <switch no.> initialized as <role> switch.
34000011	The initialization of the member switch was completed with its switch status as <role>. <switch no.>: Switch number <role>: Switch status master: Master backup: Backup [Action] None.
34000012	E3	Master switch detected switch <switch no.> initialized.
34000012	The master switch recognized that the initialization of the member switch <switch no.> was completed. <switch no.>: Switch number [Action] None.
34000013	E3	Switch <switch no.> finished switchover as <role> switch.
34000013	The switchover of the member switch was completed with its switch status as <role>. <switch no.>: Switch number <role>: Switch status master: Master [Action] None.
38000001	E3	Switch <switch no.> failed to read the learned MAC Address Table during the synchronization process.
38000001	The member switch failed to read MAC address table learned during the synchronization process. <switch no.>: Switch number [Action] If this message is repeatedly output, replace the member switch.