35.3.1 List of operation commands
The following table lists the operation commands related to network partitions.
Command name |
Description |
---|---|
show vlan #1 |
VLAN information is displayed. |
show ip vrf #2 |
Displays IPv4 information in VRFs. |
show ipv6 vrf #3 |
Displays the IPv6 information for VRFs. |
- Note #1
-
See "Operation Command Reference Vol.1" "24 VLAN".
- Note #2
-
See Operation Command Reference Vol.2" "7 IPv4 Routing Protocol.
- Note #3
-
See Operation Command Reference Vol.2" "14 IPv6 Routing Protocol.