32.2.1 List of operation commands
The following tables list IPv6 multicast operation commands.
|
Command name |
Description |
|---|---|
|
show ipv6 mcache |
Shows a list of all multicast paths. |
|
show ipv6 mroute |
Shows PIM-SM multicast routing information. |
|
show ipv6 pim interface |
Shows the status of the IPv6 PIM-SM/SSM interface. |
|
show ipv6 pim neighbor |
Shows neighbor information for the IPv6 PIM-SM/SSM interface. |
|
show ipv6 pim mcache |
Shows multicast forwarding entries for IPv6 PIM-SM/SSM. |
|
show ipv6 pim bsr |
Shows the IPv6 PIM-SM BSR information. |
|
show ipv6 pim rp-mapping |
Shows the IPv6 PIM-SM rendezvous point information. |
|
show ipv6 pim rp-hash |
Shows the rendezvous point information for each IPv6 PIM-SM group. |
|
show ipv6 mld interface |
Shows the status of the MLD interface. |
|
show ipv6 mld group |
Shows MLD information. |
|
show ipv6 rpf |
Shows PIM RPF information. |
|
show ipv6 multicast statistics |
Shows IPv6 multicast statistics. |
|
clear ipv6 multicast statistics |
Clears IPv6 multicast statistics. |
|
restart ipv6-multicast |
This example shows how to restart the IPv6 multicast routing program. |
|
debug protocols ipv6-multicast |
Enables the IPv6 multicast routing program to log event information to syslog. |
|
no debug protocols ipv6-multicast |
Stops the logging of event information to syslog by the IPv6 multicast routing program. |
|
dump protocols ipv6-multicast |
Obtains a dump of control table information and event trace information being collected by the IPv6 multicast routing program. |
|
erase protocol-dump ipv6-multicast |
Deletes the dump of the event trace information file, control table information file, and core file created by the IPv6 multicast routing program. |