32.1.14 Set IPv6 PIM-SM Static Rendezvous Point in VRF [SL-L3A]

Points to note

The configuration below is performed in global configuration mode to specify a static rendezvous point for a VRF. In the procedure below, 2001:db8::b is used as the IPv6 address of the VRF 10 static rendezvous point.

Command examples

1. (config)# ipv6 pim vrf 10 rp-address 2001:db8::10

   Specifies 2001:db8::10 as the rendezvous point for VRF 10.