30.3.9 Check Extranet [SL-L3A]

To display only the imported routes, specify extra-vrf as the protocol in the show ipv6 route operation command.

Figure 30-20: Display show ipv6 route Command-View
> show ipv6 route vrf 2 extra-vrf Date 20XX/12/20 12:00:00 UTC VRF:2 Total: 1 routes Destination Next Hop Interface Metric Protocol Age 3ffe:210:6705:1::/64 3ffe:501:811:ff01::1 VLAN0010 0/0 Extra-Vrf 365d : > > show ipv6 route vrf 3 extra-vrf Date 20XX/12/20 12:00:00 UTC VRF:3 Total: 1 routes Destination Next Hop Interface Metric Protocol Age 3ffe:109:2011:1::/64 3ffe:500:811:1000::1 VLAN0011 0/0 Extra-Vrf 365d >

Figure 30-20: Display show ipv6 route Command-View

> show ipv6 route vrf 2 extra-vrf
Date 20XX/12/20 12:00:00 UTC
VRF:2  Total: 1 routes
Destination                              Next Hop
     Interface     Metric  Protocol  Age
3ffe:210:6705:1::/64                     3ffe:501:811:ff01::1
     VLAN0010      0/0     Extra-Vrf 365d
:
>
> show ipv6 route vrf 3 extra-vrf
Date 20XX/12/20 12:00:00 UTC
VRF:3  Total: 1 routes
Destination                              Next Hop
     Interface     Metric  Protocol  Age 
3ffe:109:2011:1::/64                     3ffe:500:811:1000::1
     VLAN0011      0/0     Extra-Vrf 365d
>