29.2 Configuration of basic functions

This section describes how to configure the basic BGP4+ functionality, based on the following configuration example.

Figure 29-9: Example of connection configuration

<Structure of this section>

• 29.2.1 List of configuration commands

• 29.2.2 Configuration flow

• 29.2.3 Configuring BGP4 + Peering

• 29.2.4 BGP4 + route learning policy settings

• 29.2.5 BGP4 + Route Advertisement Policy Settings

• 29.2.6 Configuring learned route filters

• 29.2.7 Configuring advertised route filters

• 29.2.8 Setting Learned Route Filtering Conditions

• 29.2.9 Setting advertised route filtering conditions

• 29.2.10 Reflecting filter settings in operation

• 29.2.11 Configuring BGP4+ in VRF