25.3.3 Verifying Gateway Information

Check information about a static route gateway.

Figure 25-7: Result of show ipv6 static gateway
>show ipv6 static gateway Date 20XX/07/14 12:00:00 UTC Gateway Status Success Failure Transition 2001:db8:1:1::2 IFDown - - - 2001:db8:1:2::2 - - - - 2001:db8:2:1::2 - - - - 2001:db8:2:2::2 - - - - 2001:db8:3:1::2 Reach - 0/4 13m 39s 2001:db8:3:2::2 UnReach 1/2 - 21s fe80::3%VLAN0010 - - - -

Figure 25-7: Result of show ipv6 static gateway

>show ipv6 static gateway
Date 20XX/07/14 12:00:00 UTC
Gateway                              Status  Success     Failure  Transition
2001:db8:1:1::2                      IFDown  -           -           -
2001:db8:1:2::2                      -       -           -           -
2001:db8:2:1::2                      -       -           -           -
2001:db8:2:2::2                      -       -           -           -
2001:db8:3:1::2                      Reach   -           0/4         13m 39s
2001:db8:3:2::2                      UnReach 1/2         -           21s
fe80::3%VLAN0010                     -       -           -           -

Notes

The Status field indicates whether a dynamically monitored gateway is reachable. Reach means that the route is confirmed to be reachable, and UnReach means that the route has not been confirmed as reachable.
If the dynamic monitoring functionality has not yet confirmed that the route is reachable (UnReach appears in the Status field), check the gateway's monitoring status from the Success counter. In the above results, gateway 2001:db8:3:2::2 has a Success counter of 1/2. This means that two consecutive responses are required to confirm reachability, and at present one successful response has been received.