24.13.1 List of configuration commands
The following tables list VRF configuration commands.
|
Command name |
Description |
|---|---|
|
match vrf #1 |
Configures route-map to use a VRF as filter conditions. |
|
route-map #1 |
Configures route-map. |
|
ipv6 route #2 |
Generates an IPv6 static route. |
|
ipv6 import inter-vrf #3 |
Applies a filter to control which routes are imported from another VRF or the global network. |
|
ipv6 maximum routes #3 |
Sets the maximum number of routes for the VRF and the threshold for output of a warning message. |
|
vrf definition #3 |
Configures a VRF. |
- Note #1
-
See "Configuration Command Reference Vol.2" "15 Route Filtering (Common to IPv4/IPv6)".
- Note #2
-
See Configuration Command Reference Vol.2" "25 Static Routing (IPv6).
- Note #3
-
See "Configuration Command Reference Vol.2" "32 VRF".