24.9.1 List of operation commands
The following table lists the operation commands related to route summarization.
Command name |
Description |
---|---|
show ipv6 route |
Displays routing information stored in the routing table. |
show ipv6 rip |
Shows information about the RIPng protocol. |
show ipv6 ospf |
Shows information related to the OSPFv3 protocol. |
show ipv6 bgp |
Shows information about the BGP4+ protocol. |
restart unicast # |
Restarts the unicast routing program. |
dump protocols unicast # |
Outputs the trace information and control table information collected by the unicast routing program to a file. |
erase protocol-dump unicast # |
Deletes the file of trace information and control table information generated by the unicast routing program. |
- #
-
See "Operation Command Reference Vol.2" "9 IPv4 .IPv6 Routing Protocols".