24.8.1 List of configuration commands
The following table lists the commands used to configure route summarization.
|
Command name |
Description |
|---|---|
|
ipv6 summary-address |
Generates a summarized IPv6 route. |
|
redistribute (BGP4+) # |
Sets the protocol types of routes advertised from BGP4+. |
|
redistribute (OSPFv3) # |
Sets the protocol types of routes advertised from OSPFv3. |
|
redistribute (RIPng) # |
Sets the protocol types of routes advertised from RIPng. |
- #
-
See "Configuration Command Reference Vol.2" "15 Route Filtering (Common to IPv4/IPv6)".