23.3.1 List of operation commands
The following tables list the operation commands for IPv6 DHCP servers.
Command name |
Description |
---|---|
show ipv6 dhcp binding |
Shows the binding information on the IPv6 DHCP server. |
clear ipv6 dhcp binding |
Deletes the binding information on the IPv6 DHCP server. Note that the IPv6 DHCP clients that were using the deleted prefix are no longer able to communicate after this operation. |
show ipv6 dhcp server statistics |
Shows statistics about the IPv6 DHCP server. |
clear ipv6 dhcp server statistics |
Resets statistics on the IPv6 DHCP server. |
restart ipv6-dhcp server |
Restarts the IPv6 DHCP server daemon process. |
dump protocols ipv6-dhcp server |
Outputs the server logs and packet transmission and reception logs recorded by an IPv6 DHCP server to a file. |
ipv6-dhcp server monitor |
Starts collection of sending and receiving log data for packets which are sent and received by the IPv6 DHCP server. |
no ipv6-dhcp server monitor |
Stops obtaining the transmission and reception logs of the packets that are sent and received by an IPv6 DHCP server. |
set ipv6-dhcp server duid |
Creates a DUID file for an IPv6 DHCP server |
show ipv6-dhcp server duid |
Shows the contents of a DUID file maintained by an IPv6 DHCP server. |
erase ipv6-dhcp server duid |
Deletes a DUID file maintained by an IPv6 DHCP server. |