22.3.3 Checking the routing information of the distribution prefix

When routes are automatically generated for clients to which prefixes are distributed, execute the show ipv6 route command to check the routing information. The routes are registered as static routes in the routing information.

Figure 22-7: Example of displaying route information
> show ipv6 route -s static Date 20XX/04/09 12:00:00 UTC Total: 5 routes Destination Next Hop Interface Metric Protocol Age 3ffe:abcd:1234::/64 fe80::203:ffff:fe20:9982%VLAN0030 VLAN0030 0/0 Static 4m 33s , <Active Gateway Dhcp> 3ffe:aaaa:1234::/64 fe80::203:ffff:fe20:9982%VLAN0020 VLAN0020 0/0 Static 4m 33s , <Active Gateway Dhcp> 3ffe:1234:5678::/64 fe80::203:ffff:fe20:9982%VLAN0010 VLAN0010 0/0 Static 4m 33s , <Active Gateway Dhcp> >

Figure 22-7: Example of displaying route information

> show ipv6 route -s static
Date 20XX/04/09 12:00:00 UTC
Total: 5 routes
Destination                                 Next Hop
Interface      Metric   Protocol  Age
3ffe:abcd:1234::/64                         fe80::203:ffff:fe20:9982%VLAN0030
VLAN0030       0/0      Static     4m 33s , <Active Gateway Dhcp>
3ffe:aaaa:1234::/64                         fe80::203:ffff:fe20:9982%VLAN0020
VLAN0020       0/0      Static     4m 33s , <Active Gateway Dhcp>
3ffe:1234:5678::/64                         fe80::203:ffff:fe20:9982%VLAN0010
VLAN0010       0/0      Static     4m 33s , <Active Gateway Dhcp>
>