19.2.4 Checking the route to the destination address

Execute the traceroute ipv6 command to check the routers between the interface of the Switch connected to the IPv6 network and the destination.

Figure 19-4: Result of executing traceroute ipv6 command
> traceroute ipv6 2003::1 numeric traceroute6 to 2003::1 (2003::1), 30 hops max, 40 byte packets 1 2001::1 0.612 ms 0.541 ms 0.532 ms 2 2002::1 0.905 ms 0.816 ms 0.807 ms 3 2003::1 1.325 ms 1.236 ms 1.227 ms >

Figure 19-4: Result of executing traceroute ipv6 command

> traceroute ipv6 2003::1 numeric
traceroute6 to 2003::1 (2003::1), 30 hops max, 40 byte packets
1  2001::1  0.612 ms  0.541 ms  0.532 ms
2  2002::1  0.905 ms  0.816 ms  0.807 ms
3  2003::1  1.325 ms  1.236 ms  1.227 ms
>