19.1.1 List of configuration commands
The following tables list IPv6 configuration commands.
Command name |
Description |
---|---|
ipv6 address |
Sets the IPv6 address. |
ipv6 enable |
Enables IPv6 on an interface. This command automatically creates a link-local address. |
ipv6 icmp error-interval |
Specifies the sending interval of ICMPv6 error messages. |
ipv6 icmp nodeinfo-query |
Responds to queries from terminals. |
ipv6 redirects |
Specifies whether ICMPv6 Redirect messages can be sent. |
ip redirects (global) # |
Specifies whether ICMP and ICMPv6 Redirect messages can be sent for the entire Switch. |
- #
-
See "Configuration Command Reference Vol.2" "2 IPv4 .ARP .ICMP".