16.2.1 List of operation commands
The following tables list IPv4 multicast operation commands.
|
Command name |
Description |
|---|---|
|
show ip mcache |
Shows a list of all multicast paths. |
|
show ip mroute |
Shows PIM-SM/SSM multicast routing information. |
|
show ip pim interface |
Shows the status of the PIM-SM/SSM interface. |
|
show ip pim neighbor |
Shows neighbor information for the PIM-SM/SSM interface. |
|
show ip pim mcache |
Shows multicast forwarding entries for PIM-SM/SSM. |
|
show ip pim bsr |
Shows the PIM-SM BSR information. |
|
show ip pim rp-mapping |
Shows the PIM-SM rendezvous point information. |
|
show ip pim rp-hash |
Shows the rendezvous point information for each PIM-SM group. |
|
show ip igmp interface |
Shows the status of the IGMP interface. |
|
show ip igmp group |
Shows IGMP group information. |
|
show ip rpf |
Shows PIM RPF information. |
|
show ip multicast statistics |
Shows IPv4 multicast statistics. |
|
clear ip multicast statistics |
Clears IPv4 multicast statistics. |
|
show ip multicast resources |
Shows the number of entries used in IPv4 multicast routing. |
|
restart ipv4-multicast |
Restarts the IPv4 multicast routing program (mrp). |
|
dump protocols ipv4-multicast |
Collects a dump of event trace information and control table information. |
|
erase protocol-dump ipv4-multicast |
Deletes event trace information, control table information, and core file dumps. |