16.1.14 Set IPv4 PIM-SM Static Rendezvous Point in VRF [SL-L3A]
- Points to note
-
The configuration below is performed in global configuration mode to specify a static rendezvous point for a VRF. The following example shows a configuration in which IP of VRF 10 static-rendezvous point is 192.168.10.1.
Command examples
-
(config)# ip pim vrf 10 rp-address 192.168.10.1
Specify 192.168.10.1 as the rendezvous point in VRF 10.