14.3.10 Check Extranet [SL-L3A]

To display only the imported routes, specify extra-vrf as the protocol in the show ip route operation command.

Figure 14-21: Display show ip route Command-View
> show ip route vrf 2 extra-vrf Date 20XX/12/20 12:00:00 UTC Total: 1 routes Destination Next Hop Interface Metric Protocol Age 172.16.3.0/24 10.3.1.1 VLAN0030 0/0 Extra-Vrf 365d > > show ip route vrf 3 extra-vrf Date 20XX/12/20 12:00:00 UTC Total: 1 routes Destination Next Hop Interface Metric Protocol Age 172.16.1.0/24 10.1.1.1 VLAN0010 0/0 Extra-Vrf 365d

Figure 14-21: Display show ip route Command-View

> show ip route vrf 2 extra-vrf
Date 20XX/12/20 12:00:00 UTC
Total: 1 routes
Destination        Next Hop        Interface      Metric  Protocol   Age
172.16.3.0/24      10.3.1.1        VLAN0030       0/0     Extra-Vrf  365d
>
> show ip route vrf 3 extra-vrf
Date 20XX/12/20 12:00:00 UTC
Total: 1 routes
Destination        Next Hop        Interface      Metric  Protocol   Age
172.16.1.0/24      10.1.1.1        VLAN0010       0/0     Extra-Vrf  365d