13.2.10 Reflecting filter settings in operation

Points to note

The example below shows how to apply the route filters set as the learned route and advertised route filter conditions, by using the clear ip bgp operation command.

Command examples

1. # clear ip bgp * both

   Applies the learned route filter and advertised route filter to BGP4+ operation.

Notes

The operation-command clear ip bgp(* in,* out,* both specification applies both route filtering changes and route refresh functionality (see 13.4.5 Route refresh). If route refresh capability has not been negotiated, no route refresh requests are made in order to relearn changed routes, although the route filter changes are applied.