12.9.1 List of operation commands
The following tables list the operation commands for OSPF of the extended functions.
Command name |
Description |
---|---|
show ip ospf |
Shows domain information (including the status of area borders and graceful restarts) and the area configuration. |
clear ip ospf |
Clears information about the OSPF protocol. You can stop the switch from acting as a stub router by executing this command with the stub-router parameter. |
show graceful-restart unicast # |
Displays the operating status of the restart router for graceful restart of the unicast routing protocol. |
- #
-
See "Operation Command Reference Vol.2" "9 IPv4 .IPv6 Routing Protocols".