12.4.1 List of configuration commands
The following table lists the commands used to configure neighboring router authentication. By setting SNMP configuration, you can send SNMP notifications for error packets such as authentication failures.
Command name |
Description |
---|---|
area authentication |
Sets the authentication method (plain-text password or MD5 authentication). |
area virtual-link |
Sets the authentication key via the authentication-key and message digest-key md5 parameters. |
ip ospf authentication |
Sets the authentication method (plain-text password or MD5 authentication). |
ip ospf authentication-key |
Sets the authentication key. |
ip ospf message-digest-key |
Sets the MD5 authentication key. |
snmp-server host # |
Configure the network-management appliance to which you want to send SNMP notifications. |
- #
-
See "Configuration Command Reference Vol.1" "13 SNMP".