9.3.3 Verifying Gateway Information

Check information about a static route gateway.

Figure 9-7: Result of show ip static gateway
> show ip static gateway Date 20XX/07/14 12:00:00 UTC Gateway Status Success Failure Transition 10.1.1.50 IFdown - - - 10.1.1.100 - - - - 10.2.1.100 Reach - 0/4 13m 39s 10.2.1.101 UnReach 1/2 - 21s 172.16.1.100 - - - - 172.16.2.100 - - - -

Figure 9-7: Result of show ip static gateway

> show ip static gateway
Date 20XX/07/14 12:00:00 UTC
Gateway         Status  Success     Failure     Transition
10.1.1.50       IFdown  -           -           - 
10.1.1.100      -       -           -           - 
10.2.1.100      Reach   -           0/4         13m 39s 
10.2.1.101      UnReach 1/2         -           21s
172.16.1.100    -       -           -           -
172.16.2.100    -       -           -           -

Notes

The Status field indicates whether a dynamically monitored gateway is reachable. Reach means that the route is confirmed to be reachable, and UnReach means that the route has not been confirmed as reachable.
If the dynamic monitoring functionality has not yet confirmed that the route is reachable (UnReach appears in the Status field), check the gateway's monitoring status from the Success counter. In the above results, gateway 10.2.1.101 has a Success counter of 1/2. This means that two consecutive responses are required to confirm reachability, and at present one successful response has been received.