8.13.1 List of configuration commands
The following tables list VRF configuration commands.
Command name |
Description |
---|---|
ip route #1 |
Generates an IPv4 static route. |
match vrf #2 |
Configures route-map to use a VRF as filter conditions. |
route-map #2 |
Configures route-map. |
import inter-vrf #3 |
Applies a filter to control which routes are imported from another VRF or the global network. |
maximum routes #3 |
Sets the maximum number of routes for the VRF and the threshold for output of a warning message. |
vrf definition #3 |
Configures a VRF. |
- Note #1
-
See Configuration Command Reference Vol.2" "11 Static Routing (IPv4).
- Note #2
-
See "Configuration Command Reference Vol.2" "15 Route Filtering (Common to IPv4/IPv6)".
- Note #3
-
See "Configuration Command Reference Vol.2" "32 VRF".