8.9.1 List of operation commands
The following tables list the route summarization operation commands [IPv4].
Command name |
Description |
---|---|
show ip route |
Displays routing information stored in the routing table. |
show ip rip |
Shows information about the RIP protocol. |
show ip ospf |
Shows information about the OSPF protocol. |
show ip bgp |
Shows information about the BGP protocol. |
restart unicast # |
Restarts the unicast routing program. |
dump protocols unicast # |
Outputs the trace information and control table information collected by the unicast routing program to a file. |
erase protocol-dump unicast # |
Deletes the file of trace information and control table information generated by the unicast routing program. |
- #
-
See "Operation Command Reference Vol.2" "9 IPv4 .IPv6 Routing Protocols".