8.8.1 List of configuration commands
The following table lists the commands used to configure route summarization.
|
Command name |
Description |
|---|---|
|
ip summary-address |
Generates a summarized IPv4 route. |
|
redistribute (BGP4) # |
Sets the protocol types of routes advertised from BGP4. |
|
redistribute (OSPF) # |
Sets the protocol types of routes advertised from OSPF. |
|
redistribute (RIP) # |
Sets the protocol types of routes advertised from RIP. |
- #
-
See "Configuration Command Reference Vol.2" "15 Route Filtering (Common to IPv4/IPv6)".