8.1.4 Scope of each routing protocol
The following table provides an overview of the routing information and functionality offered by the Switch for each supported routing protocol.
|
Routing information |
Routing |
|||||
|---|---|---|---|---|---|---|
|
Static |
Dynamic |
|||||
|
RIP-1 |
RIP-2 |
OSPF |
BGP4 |
|||
|
Routing information |
Default route |
OK |
OK |
OK |
OK |
OK |
|
Natural mask route |
OK |
OK |
OK |
OK |
OK |
|
|
Subnet route |
OK |
OK |
OK |
OK |
OK |
|
|
Host route |
OK |
OK |
OK |
OK |
OK |
|
|
Variable length subnet mask |
OK |
NG |
OK |
OK |
OK |
|
|
CIDR compatibility |
OK |
# |
OK |
OK |
OK |
|
|
Multipath (max 16 paths) |
OK |
NG |
NG |
OK |
OK |
|
|
Route selection |
- |
Metric (hop count) |
Cost (hop count and line speed) |
AS path attribute |
||
|
Routing loop prevention |
- |
Split horizon |
OK |
OK |
||
|
Authentication functionality |
- |
NG |
NG |
OK |
OK |
|
- Legend
-
OK: Supported
# : Partially supported (supported for 0 subnet and -1 subnet routes)
NG: Not supported
-:Not applicable