6.3.1 List of operation commands
The following tables list the operation commands for DHCP servers.
Command name |
Description |
---|---|
show ip dhcp binding |
Shows the binding information on the DHCP server. |
clear ip dhcp binding |
Deletes the binding information from the DHCP server database. |
show ip dhcp import |
Shows the values of options and parameters that are set in the configuration of a DHCP server. |
show ip dhcp conflict |
Displays an IP address conflict detected by the DHCP server. An IP address conflict refers to when an IP address is indicated as available in the DHCP address pool on the DHCP server but is already assigned to a terminal on the network. Before the DHCP server assigns the IP address to a DHCP client, the DHCP server detects an IP address conflict by checking for a response to a sent ICMP packet. |
clear ip dhcp conflict |
Clears the IP address conflict information from the DHCP server. |
show ip dhcp server statistics |
Shows statistics about the DHCP server. |
clear ip dhcp server statistics |
Resets statistics on the DHCP server. |
restart dhcp |
Restarts the DHCP server daemon process. |
dump protocols dhcp |
Outputs the server log data and the packet sending and receiving log data collected by the DHCP server program to a file. |
dhcp server monitor |
Starts collection of sending and receiving log data for packets which are sent and received by the DHCP server. |
no dhcp server monitor |
Stops collection of the sending and receiving log data for packets on the DHCP server. |