5.1.2 Check details when DHCP/BOOTP packet is received
The following table describes the items that are checked when the DHCP or BOOTP relay agent receives DHCP or BOOTP packets.
DHCP/BOOTP packet header field |
Check item |
Handling if a packet fails the check |
|
---|---|---|---|
From client to server |
From server to client |
||
BOOTP REQUEST HOPS |
The number of hops must be smaller than the value specified in the configuration. |
Discarded |
Not discarded |
Relay agent address |
The address must be the address of the Switch being used. |
Discarded |
Discarded |
TTL in the IP header |
1 or more |
Discarded |
Discarded |
Source address in the IP header |
The network number must be a value other than 0. |
Not discarded |
Discarded |