4.3.1 List of operation commands
The following table lists the operation commands related to policy-based routing.
|
Command name |
Description |
|---|---|
|
show ip policy |
Shows VLAN ID and access list information about the VLAN interfaces for which IPv4 policy-based routing is enabled. |
|
show ip cache policy |
Shows the routing information and status for the specified policy-based routing list information. |
|
reset policy-list |
Reselects the routing information. |
|
dump policy |
Outputs to a file event trace information and control table information collected by the policy-based program. |
|
restart policy |
Restarts the policy-based program. |
|
show access-filter # |
Shows the statistics for the access list (access-list or ip access-list) configured by using the access group command (ip access-group). |
|
clear access-filter # |
Clears the statistics for the access list (access-list or ip access-list) configured by using the access group command (ip access-group). |
- #
-
See Operation Command Reference Vol.1" "29 Filters.
The following table lists the operation commands related to the policy-based routing tracking functionality.
|
Command name |
Description |
|---|---|
|
show track-object |
Shows track information for the tracking functionality. |
|
dump protocols track-object |
Outputs trace information or debug information collected by the track object program to a file. |
|
restart track-object |
Restarts the track object program. |