4.1.4 Address type that can be set for the next hop
The following table describes the IP address types that can be set as a next hop for policy-based routing.
Address types |
Setting |
---|---|
Unicast address (including the receiving interface) |
OK # |
IP address set for the destination interface |
NG |
Multicast |
NG |
Restricted broadcast address |
NG |
Direct broadcast address to the network connected to the destination interface |
NG |
Internal loopback address (127.0.0.0) |
NG |
(Legend) OK: Can be set NG: Cannot be set
#: Only the addresses in the same network as the address set for the destination interface can be set.