2.2.4 Checking the route to the destination address

Execute the traceroute command to check the routers between the interface of the Switch connected to the IPv4 network and the destination.

Figure 2-4: Result of executing traceroute command
> traceroute 192.168.0.1 numeric traceroute to 192.168.0.1 (192.168.0.1), 30 hops max, 40 byte packets 1 192.168.2.101 0.612 ms 0.541 ms 0.532 ms 2 192.168.1.51 0.905 ms 0.816 ms 0.807 ms 3 192.168.0.1 1.325 ms 1.236 ms 1.227 ms >

Figure 2-4: Result of executing traceroute command

> traceroute 192.168.0.1 numeric
traceroute to 192.168.0.1 (192.168.0.1), 30 hops max, 40 byte packets
1  192.168.2.101  0.612 ms  0.541 ms  0.532 ms
2  192.168.1.51  0.905 ms  0.816 ms  0.807 ms
3  192.168.0.1  1.325 ms  1.236 ms  1.227 ms
>