25.2.1 List of configuration commands
The following tables list OADP configuration commands.
Command name |
Description |
---|---|
oadp cdp-listener |
Enables the CDP reception functionality. |
oadp enable |
Enables OADP for a port or link aggregation. |
oadp hold-time |
Specifies how long the OADP frames sent from the Switch to neighboring devices will be retained on the neighboring devices. |
oadp ignore-vlan |
Specifies that any OADP frames received from the VLAN specified by the VLAN ID are to be ignored. |
oadp interval-time |
Specifies the interval at which the Switch sends OADP frames. |
oadp run |
Enables OADP for the entire device. |