24.3.2 Viewing LLDP Info

LLDP information can be displayed by using the show lldp operation command. The show lldp command displays the LLDP settings and the number of neighboring devices for each port. The show lldp detail command displays detailed information about neighboring devices.

Figure 24-2: Result of executing show lldp command
> show lldp Date 20XX/11/09 19:16:20 UTC Status: Enabled Chassis ID: Type=MAC Info=0012.e268.2c21 Interval Time: 30 Hold Count: 4 TTL:120 Port Counts=3 1/0/1 (CH:10) Link:Up Neighbor Counts: 2 1/0/2 Link:Down Neighbor Counts: 0 2/0/3 Link:Up Neighbor Counts: 0 >

Figure 24-2: Result of executing show lldp command

> show lldp
Date 20XX/11/09 19:16:20 UTC
Status: Enabled Chassis ID: Type=MAC      Info=0012.e268.2c21 
Interval Time: 30   Hold Count: 4  TTL:120
Port Counts=3
1/0/1 (CH:10)  Link:Up    Neighbor Counts:  2
1/0/2          Link:Down  Neighbor Counts:  0
2/0/3          Link:Up    Neighbor Counts:  0
>