13.3.5 GSRP VLAN group-only control function

Using the gsrp limit-control configuration command, you can limit the VLANs under GSRP control only to those that belong to VLAN groups. Because VLANs that do not belong to VLAN groups are not under GSRP control, you can always use them for communication.

When GSRP-managed VLANs do not belong to VLAN groups, the VLANs are not under GSRP control.As the result, the VLANs are in a loop configuration. To prevent this, make sure that GSRP-managed VLANs belong to VLAN groups when using this functionality. Here, we recommend that you configure and operate VLAN groups to which only GSRP-managed VLANs belong to prevent this functionality from affecting other VLAN groups.