13.1.3 Support Specifications
The following table describes the functionality and settings supported by GSRP and their specifications.
Item |
Description |
|
---|---|---|
Applicable layer |
Layer 2 |
OK |
Layer 3 |
Y (IPv4, IPv6) |
|
Maximum number of GSRP groups to which each switch can belong |
1 |
|
Maximum number of Switches making up a GSRP group |
2 |
|
Maximum number of VLAN groups per GSRP group |
64 |
|
Max VLAN per VLAN |
1024 |
|
Interval at which GSRP Advertise frames are sent |
0.5~ In units of 0.5 seconds in the range of 60 seconds |
|
Time GSRP Advertise frames are retained |
1 to 120 seconds in 1-second increments |
|
Load balancing |
OK |
|
Backup locking |
OK |
|
Port resetting |
OK |
|
To prevent repeated switchover, you can choose not to count link ports that are up as active ports until the links are stable. |
OK |
|
GSRP VLAN group-only control functionality |
OK |
|
Ports that are not under GSRP control |
OK |
(Legend) OK: Support