11.2.1 List of operation commands
The following tables list the operation commands for MAC authorization.
Command name |
Description |
---|---|
show mac-authentication login |
Shows the MAC addresses currently authenticated by MAC-based authentication. |
show mac-authentication logging |
Shows the operating log information for MAC-based authentication. |
show mac-authentication |
Shows the configuration for MAC-based authentication. |
show mac-authentication statistics |
Shows statistics. |
clear mac-authentication auth-state mac-address |
Forcibly clears the authentication status of authenticated terminals. |
clear mac-authentication logging |
Clears the operating log information for MAC-based authentication. |
clear mac-authentication statistics |
Clears the statistics. |
set mac-authentication mac-address |
Registers a MAC address in the internal MAC address DB. |
remove mac-authentication |
Deletes a MAC address from the internal MAC address DB. |
commit mac-authentication |
Commits the internal MAC-based authentication DB to flash memory. |
show mac-authentication mac-address |
Shows the contents of the internal MAC-based authentication DB. |
store mac-authentication |
Backs up the internal MAC-based authentication DB. |
load mac-authentication |
Restores the internal MAC-based authentication DB from a backup file. |
clear mac-authentication dead-interval-timer |
Directs the switch to return to accessing the first RADIUS server, having moved on to another RADIUS server as a result of the dead interval functionality. |
restart mac-authentication |
Restarts the MAC-based authentication program. |
dump protocols mac-authentication |
Creates a dump file of information related to MAC-based authentication. |