3.10.1 Frame subject to priority determination
Priority determination operation change is a function that makes a frame addressed to the Switch that is not subject to priority determination a target for priority determination. By default, only frames forwarded by the Switch are subject to priority determination. The table below describes switch configurations, the setting for changing which frames are subject to priority determination, and the corresponding frames subject to priority determination.
Switch configuration |
Setting for changing which frames are subject to priority determination |
Frame type |
|
---|---|---|---|
Frames sent to the Switch |
Frames forwarded by the Switch |
||
All models (in standalone mode) |
Not set |
NG |
OK |
Set |
OK |
OK |
|
All models (in stack mode) |
Not set |
OK |
OK |
Set |
OK |
OK |
Legend: OK: Becomes subject to priority determination, NG: Does not become subject to priority determination