3.6.6 Checking bandwidth violation notifications

The following figure shows how to check for bandwidth violation notifications.

Figure 3-10: Checking bandwidth violation notifications
> show qos-flow 1/0/7 Date 20XX/12/01 13:00:00 UTC Using Port:1/0/7 in IP qos-flow-list:QOS-LIST4 10 ip any host 192.168.130.10 action max-rate 5M max-rate-burst 512 log trap matched packets(max-rate over) : 826 matched packets(max-rate under): 4385728 rate-alarm state: conform count: 1/ 65 total exceed-count/total conform-count: 154/ 7295 >

Figure 3-10: Checking bandwidth violation notifications

> show qos-flow 1/0/7
Date 20XX/12/01 13:00:00 UTC
Using Port:1/0/7 in
IP qos-flow-list:QOS-LIST4
      10 ip any host 192.168.130.10 action max-rate 5M max-rate-burst 512 log trap
         matched packets(max-rate over) :       826
         matched packets(max-rate under):   4385728
         rate-alarm 
              state: conform 
              count:    1/  65
              total exceed-count/total conform-count:        154/      7295
>

Confirm that "Operation message output of bandwidth violation notification (log)" and "SNMP notification (trap)" are displayed in QOS-LIST4 listing information. Also, confirm that "Bandwidth status (state:)", "Status (count:)", and "Number of bandwidth violations and cumulative bandwidth compliance count (total exceed-count/total conform-count:)" are displayed in the bandwidth violation notification information.