3.6.2 Checking the queuing priority when the minimum bandwidth monitoring is violated

The following figure shows how to check the queuing priority when non-compliance in minimum bandwidth monitoring occurs.

Figure 3-6: Checking the queuing priority when minimum bandwidth monitoring is violated
> show qos-flow 1/0/3 Date 20XX/12/01 13:00:00 UTC Using Port:1/0/3 in IP qos-flow-list:QOS-LIST2 10 ip any host 192.168.110.10 action min-rate 1M min-rate-burst 64 penalty-discard-class 1 matched packets(min-rate over) : 9826 matched packets(min-rate under): 74699826 >

Figure 3-6: Checking the queuing priority when minimum bandwidth monitoring is violated

> show qos-flow 1/0/3
Date 20XX/12/01 13:00:00 UTC
Using Port:1/0/3 in
IP qos-flow-list:QOS-LIST2
      10 ip any host 192.168.110.10 action min-rate 1M min-rate-burst 64 penalty-discard-class 1
         matched packets(min-rate over) :      9826
         matched packets(min-rate under):  74699826
>

Make sure that the minimum monitoring bandwidth (min-rate 1M), the burst size of the minimum monitoring bandwidth (min-rate-burst 64), and the queuing priority of non-compliant frames (penalty-discard-class 1) are displayed in the information for QOS-LIST2.