3.3.1 Checking the operation of QoS control using IPv4 packets as flow-detection conditions

The following figure shows how to check QoS control operation when IPv4 packets are set as the flow detection condition.

Figure 3-2: Checking the operation of QoS control using IPv4 packets as flow-detection conditions
> show qos-flow 1/0/1 Date 20XX/12/01 12:00:00 UTC Using Port:1/0/1 in IP qos-flow-list:QOS-LIST1 10 ip any host 192.168.100.10 action replace-user-priority 6 matched packets : 74699826

Make sure that IP qos-flow-list is displayed for the QoS control of the specified port.