31.2 IGMP snooping/MLD snooping Supported Functions
The following table describes the IGMP snooping and MLD snooping functionality supported by the Switch.
|
Item |
Support |
Remarks |
|
|---|---|---|---|
|
Interface type |
Full Ethernet support Only Ethernet V2 frame formats |
- |
|
|
Supported IGMP version Supported MLD version |
IGMP: Version 1, 2, and 3 MLD: Version 1, and 2 |
- |
|
|
Learned MAC address-range using this function*1 |
IPv4 |
0100.5e00.0000 ~ 0100.5e7f.ffff |
For details, see RFC 1112. |
|
IPv6 |
3333.0000.0000 ~ 3333.ffff.ffff |
For details, see RFC 2464. |
|
|
Range of learned IP addresses using this function*2 |
IPv4 |
224.0.0.0~239.255.255.255 |
- |
|
IPv6 |
IPv6 addresses whose highest 8 bits are ff (in hexadecimal) |
- |
|
|
IGMP querier MLD querier |
Querier operation is performed according to the IGMPv2 or IGMPv3 and MLDv1 or MLDv2 specifications |
- |
|
|
Settings for multicast router connection ports |
Static settings by configuration |
- |
|
|
IGMP instant detachment functionality |
Instant leave due to IGMPv2 Leave messages, or IGMPv3 Report (leave request) messages for which the multicast address record type is CHANGE_TO_INCLUDE_MODE |
- |
|
Legend:-: Not applicable
#1: When not used with IPv4 or IPv6 multicast
#2: When used with IPv4 or IPv6 multicast