23.2.5 Configuring MAC address learning movement monitoring function

Points to note

Set this when you want to detect a looping failure by moving MAC addresslearning.

Command examples

1. (config)# interface gigabitethernet 1/0/1

   (config-if)# mac-address-move detect-count 10 duration 3 action inactivate auto-recover 300

   (config-if)# exit

   If there are 11 or more MAC address movements per second on port 1/0/1 and the status continues for 3 seconds, the corresponding port is changed to inactive status. After 300 seconds have elapsed after inactive status is changed, the corresponding port is changed to active status.