21.4.1 List of configuration commands
The following table lists the commands used to configure the extended link aggregation functionality.
|
Command name |
Description |
|---|---|
|
channel-group lacp system-priority |
Sets the system priority for a channel group. The system priority is used to determine which device evaluates the aggregation condition for the port detachment restriction functionality. |
|
channel-group max-active-port |
Enables the standby link functionality, and sets how many ports in the channel group can be used for link aggregation. |
|
channel-group max-detach-port |
Enables the port detachment restriction functionality. |
|
channel-group multi-speed |
Sets mixed-speed mode. |
|
lacp port-priority |
Sets the port priority. The port priority is used to select standby links. |
|
lacp system-priority |
Sets the default value for the system priority. The system priority is used to determine which device evaluates the aggregation condition for the port detachment restriction functionality. |