18.3.1 List of operation commands
The following tables list the operation commands related to SNMP/RMON.
|
Command name |
Description |
|---|---|
|
show snmp |
Shows SNMP information. |
|
show snmp pending |
Shows pending inform requests to be sent. |
|
snmp lookup |
Shows supported MIB object names and object IDs. |
|
snmp get |
Shows the specified MIB value. |
|
snmp getnext |
Shows the MIB value following the specified one. |
|
snmp walk |
Shows the specified MIB tree. |
|
snmp getif |
Shows MIB information for the interface group. |
|
snmp getroute |
Shows the IP routing table (ipRouteTable). |
|
snmp getarp |
Shows the IP address translation table (ipNetToMediaTable). |
|
snmp getforward |
Shows ipForwardTable (the IP forwarding table). |
|
snmp rget |
Shows the MIB value for the specified remote device. |
|
snmp rgetnext |
Shows the MIB value following the specified remote device. |
|
snmp rwalk |
Shows information about the MIB tree for the specified remote device. |
|
snmp rgetroute |
Shows the IP routing table (ipRouteTable) of the specified remote device. |
|
snmp rgetarp |
Shows the IP address translation table (ipNetToMediaTable) of the specified remote device. |