18.2.10 Set MIB Accessibility from VRF by SNMPv1,SNMPv2C [SL-L3A]

Points to note

Configures access to the MIBs of the Switch from the SNMP manager in VRF.

Command examples

1. (config)# access-list 2 permit 10.1.1.1 0.0.0.0

   Configures the access list to allow access from IP address 10.1.1.1.

2. (config)# snmp-server community "NETWORK" ro 2 vrf 2

   Configures the MIB access mode for the community of an SNMP manager and the applicable access list.

   • Community name: NETWORK

   • Access list: 2

   • Access mode: read only

   • VRF ID:2