17.2.1 List of configuration commands

The following table lists the commands used to configure the log output facility.

Table 17-1: List of configuration commands (settings for outputting syslog)
Command name	Description
logging event-kind	Sets the message type of the log data to be sent to syslog servers.
logging facility	Sets a facility to which log information is output via the syslog interface.
logging host	Sets the output destination for log information.
logging trap	Sets the level of importance for log information to be sent to the syslog server.

Table 17-2: List of configuration commands (settings for outputting E-Mail)
Command name	Description
logging email	Sets the email address to which log information is output as an email.
logging email-event-kind	Use E-Mail to set the message type of the log information to be output.
logging email-from	Sets the sender of the log information output as an email.
logging email-interval	Sets the interval for sending output log information as an email.
logging email-server	Sets the SMTP server information for outputting log information as an email.