16.2.1 List of configuration commands
The following table lists the commands used to configure the power saving functionality.
|
Command name |
Description |
|
|---|---|---|
|
For setting a normal time range |
For setting a scheduled time range |
|
|
shutdown # |
schedule-power-control shutdown |
Turns off the power supplied to a port. |
|
system port-led |
schedule-power-control port-led |
Controls the brightness of the LEDs. |
|
system port-led trigger console |
Configures the setting for logging in from the console when automatic brightness adjustment takes place. |
|
|
system port-led trigger interface |
Configures the port link-up and down settings used when the automatic brightness adjustment takes place. |
|
|
system port-led trigger mc |
Configures the memory card insertion and removal settings used when the automatic brightness adjustment takes place. |
|
|
- |
schedule-power-control time-range |
Specifies the time range of the power control schedule. |
Legend:-: Not applicable
- #
-
See "Configuration Command Reference Vol.1" "15 : Ethernet".