9.3.1 List of operation commands
The following table lists the operation commands related to connection and remote operation of operation terminals.
|
Command name |
Description |
|---|---|
|
set exec-timeout |
Specifies the length of time until the user is automatically logged out. |
|
set terminal help |
Selects the type of command help messages to be displayed. |
|
set terminal pager |
Enables or disables paging. |
|
show history |
Shows a log of operation commands executed in the past. (No log is displayed for configuration commands.) |
|
telnet |
Connects via Telnet to the remote operation terminal that has the specified IP address. |
|
ftp |
Transfers files between the Switch and a remote terminal connected by using TCP/IP. |
|
tftp |
Transfers files between the Switch and a remote terminal connected by using UDP. |
For information about configuring SSH, see 11 SSH(Secure Shell).
For the configuration commands related to VLAN settings and IPv4/IPv6 interface settings, see 24 VLAN, Configuration Guide Vol.3" "2 IP .ARP .ICMP Settings and Operation, or Configuration Guide Vol.3" "19 IPv6 .NDP .ICMPv6 Settings and Operation.